Product Specification
Element PU Roof Panels are insulated roofing panels made with a rigid polyurethane (PU) foam core between two metal facings. They provide excellent thermal insulation, structural strength, and weather protection for industrial and commercial buildings.
Manufactured using an imported Italian PUMA continuous production line, Element polyurethane roof panels are designed to help reduce heat transfer, improve building energy efficiency, and simplify on-site installation. Customized panel dimensions, metal facings, and colors are available to meet different roofing requirements.
Product Specifications

.
|
Products Title |
Pu Roof Panels |
|
PPGI Thickness |
0.4-0.7mm for choose |
|
Panel Thickness |
40/50/75/100/120/150/200mm |
|
Color |
any other required on RAL Color |
|
PU Density |
42kg/m³(±2) |
|
Effective Width |
1000mm |
|
Length |
Max 11.85m for 40HQ container or customized |
|
U Value(w/mk) |
PU:≤0.024 |
|
Fire Rating |
PU:CLASS B1 |
|
Surface Texture |
Flat/Embossed Pattern/V8/Micro Ripple |
|
Application |
Factory panel/cold storage/workshop |
Factory Workshop
Our factory & quipment
PU Sandwich Panel




Sandwich Panel Install related accessories

The PU Roof Sandwich Panel inevitably requires various edging accessories.
We offer free on-site surveying and drawing services to accurately measure the dimensions of your required wall panels and ceiling panels, and calculate all the auxiliary materials needed during installation.
You only need to provide one drawing, and we will provide all the necessary installation accessories



1. Pre-Installation Verify purlin spacing (1.2–1.5 m) and flatness. Roof slope must be ≥ 1:10 (5.7°); otherwise add double butyl tape to all laps. Inspect panels for damage, color and length before starting; stop work in rain or strong wind.
2. Laying Direction Lay panels from eave to ridge, starting at the downwind gable end. Side laps overlap one corrugation, with upslope panel covering downslope. Short-edge laps must overlap ≥ 200 mm, sealed with butyl tape.
3. Screwing Drive self-drilling screws with EPDM washers only through the corrugation crest - never the valley, one screw per crest per purlin. Stop when the washer is compressed by about one third. Over-tightening causes leaks.
4. Critical Details Fit ridge capping with ridge foam underneath. All penetrations must be on crests, properly flashed and sealed. Paint cut edges with zinc primer to prevent rust. Extend eave and gutter flashings outward by 50 mm.
5. Inspection & Element Service Remove protective film within 3 months and run a 30-minute water spray test. Henan Element New Materials provides a 5-year warranty, free CAD layout, and online installation guidance via WhatsApp or video call.
Henan Element New Materials Co., Ltd.is a direct manufacturer of PU/PIR roof and cold-room panels, cold storage doors, and complete refrigeration systems.
Every panel is built to real engineering specs: 42 kg/m³ PU core, λ ≤ 0.0224W/(m·K),Element provides a 5-year written warranty, free CAD layout and cutting-list design before you order.

PU Roof Panels FAQ
1. What are PU roof panels?
PU roof panels consist of a polyurethane foam core between two metal facings, providing thermal insulation and weather protection.
2. What are PU roof panels used for?
They are suitable for factories, warehouses, workshops, cold storage facilities, and commercial buildings.
3. What is the thermal conductivity of Element PU roof panels?
The thermal conductivity is ≤0.024 W/(m·K).
4. Can PU roof panels be customized?
Yes. Element offers customized panel dimensions, metal facings, thicknesses, and RAL colors.
5. Are PU roof panels waterproof?
Properly installed panels with suitable fasteners, sealed joints, and flashing accessories help prevent water infiltration.
6. How are PU roof panels installed?
They are fixed to the supporting structure using suitable fasteners, followed by joint sealing and flashing installation.
7. What is the delivery time?
Typical delivery is 15–20 days after specifications are confirmed and the deposit is received, depending on order requirements.
