FAQs on Selecting Cold Storage Panels: 15 Questions Buyers Should Ask Before Placing an Order

Oct 02, 2026

Leave a message

 

If you are planning a cold room, walk-in freezer, refrigerated warehouse, or food processing facility, choosing the right cold room panels is one of the most important decisions you need to make.

The panel affects insulation performance, temperature stability, energy consumption, installation, and the overall cost of your cold storage project.

But many buyers are not sure which panel thickness, insulation material, surface finish, or panel structure they actually need.

To make the purchasing process easier, we have answered 15 of the most common questions buyers ask before ordering cold room panels from China.


1. What is a cold room panel?

 

For cold storage applications, polyurethane (PU) sandwich panels are widely used because they provide a combination of thermal insulation, low weight, strength, and moisture resistance.

Cold room panels are commonly used in:

Walk-in chillers

Walk-in freezers

Frozen food warehouses

Seafood cold storage

Fruit and vegetable cold rooms

Meat processing facilities

Pharmaceutical cold rooms

Food processing plants

Cold chain logistics warehouses


2. What is the difference between a cold room panel and a normal sandwich panel?

Although both products use a sandwich structure, their applications and specifications can be different.

A cold room panel is specifically designed for temperature-controlled environments. Its insulation thickness, joint design, surface material, and sealing system are selected to reduce heat transfer and air leakage.

For example, a general building sandwich panel may be suitable for a warehouse wall, but it may not provide the insulation performance or airtightness required for a -18°C freezer.

When purchasing panels for a cold storage project, buyers should consider the following:

Factor Cold Room Panel General Sandwich Panel
Main application Cold rooms and freezers Buildings and warehouses
Insulation PU/PIR/EPS and others Various
Thickness Usually selected according to temperature Selected according to building requirements
Joint sealing Important Depends on application
Temperature control Critical Usually less critical
Moisture resistance Important Depends on product

3. What thickness of cold room panel do I need?

This is one of the most important questions when buying cold storage panels.

The correct thickness depends mainly on the room temperature, room size, climate, insulation material, and project design.

As a general starting point for PU panels:

Cold Room Application Typical Temperature Suggested PU Panel Thickness
Chiller / fresh storage 0 to -5°C 75–100 mm
Standard freezer Around -18°C 150 mm
Deep freezer / blast freezer -25 to -35°C 175–200 mm
Lower-temperature applications Below -35°C Project-specific

For example, Element generally recommends 75/100 mm PU panels for 0 to -5°C chiller rooms, 150 mm for -18°C freezer rooms, and 175/200 mm for -25 to -35°C blast freezers.

These figures should be treated as a starting point rather than a universal engineering rule. Final panel thickness should be confirmed according to the actual project conditions.

 


4. Is a thicker cold room panel always better?

Not necessarily.

A thicker panel generally provides greater thermal resistance, but increasing thickness also increases material cost, transportation cost, and sometimes installation requirements.

The goal is not simply to buy the thickest panel available.

The better approach is to select a panel thickness that matches:

Required room temperature/Outside temperature/Cold room dimensions/Operating hours/Product temperature/Humidity conditions

Energy-efficiency requirements/Local construction standards

For this reason, professional panel suppliers should ask for project information before recommending a final thickness.

  


5. Should I choose PU or PIR cold room panels?

Both PU and PIR can be used for cold storage insulation, but they are not exactly the same.

PU Cold Room Panels

PU, or polyurethane, is widely used for cold rooms because of its good thermal insulation performance, lightweight structure, and broad range of applications.

PIR Cold Room Panels

PIR, or polyisocyanurate, is often selected when a project places greater emphasis on fire-performance requirements.

The right choice depends on the project specifications, local regulations, fire requirements, temperature range, and budget.

If you are unsure whether PU or PIR is suitable for your project, provide the room temperature and application to your panel supplier before ordering.

 


6. What materials are available for the panel surface?

Cold room panels can be manufactured with different surface materials depending on the application.

Common options include:

PPGI / pre-painted galvanized steel

Stainless steel 304

Stainless steel 316

Embossed aluminum

Other customized surface materials

For general cold storage projects, PPGI is a common choice.

For food processing, pharmaceutical, seafood, or high-hygiene environments, stainless steel may be considered depending on the project requirements.

Element supplies PPGI, 304/316 stainless steel, and embossed aluminum surface options. The standard color is RAL9002, while other RAL colors can be customized.


7. What steel sheet thickness should I choose?

The metal skin thickness affects the panel's surface strength, appearance, durability, and cost.

Common thicknesses include:

0.4 mm/0.45 mm/0.5 mm/0.6 mm/0.7 mm

The appropriate thickness depends on the application, panel size, installation method, and project requirements.

For a commercial cold room, buyers should not compare panels only by the insulation thickness. The metal sheet specification should also be clearly stated in the quotation.


8. What panel width and length are available?

Cold room panels are usually manufactured in standard widths, but dimensions can also be customized according to the project.

Element offers standard effective widths of 960 mm, 1000 mm, and 1120 mm, with maximum customized panel lengths up to approximately 11,800 mm.

Thickness / Grade

Outer

0.4-0.8/G350

Inner

0.4-0.8/G350

Supply Dimensions

Width mm

450-1120

Thicknessmm

100-200

Length

mm

≤Transport Length

Material

PPGl / Stainless Steel

Core Material

PIR

When placing an order, buyers should provide:

Cold room length/Cold room width/Cold room height/Wall panel dimensions

Ceiling dimensions/Floor requirements/Door opening dimensions

Providing a detailed panel layout can help reduce cutting waste and installation problems.


9. What is the best surface color for cold room panels?

White or light-colored panels are commonly used in cold rooms because they provide a clean and bright appearance.

Element's standard panel color is RAL9002, while other RAL colors can be customized according to project requirements.

For food processing and pharmaceutical applications, buyers should pay more attention to surface cleanliness, corrosion resistance, and hygiene requirements than simply choosing a color.


10. How do cold room panels connect to each other?

Cold room panels normally use an interlocking or joint system to connect adjacent panels.

Depending on the panel design, common systems include:

Cam-lock connection

Tongue-and-groove connection

Male-and-female joint

Other customized locking systems

A good joint system helps improve installation efficiency and reduce air leakage.

For freezer rooms, proper sealing at panel joints is particularly important because even a high-performance insulation core cannot compensate for significant air leakage.


11. Can cold room panels be customized?

Yes.

Professional cold room panel manufacturers can usually customize the panels according to project requirements.

Customization may include:

Panel thickness/Panel length/Effective width/Steel sheet thickness/Surface material/Surface finish/Color/Joint system

Fire-performance requirements

For example, Element can customize panel dimensions, surface materials, colors, and other specifications based on the customer's project requirements.


12. How much do cold room panels cost?

There is no single price for all cold room panels.

The final price depends on several factors:

1. Insulation material

PU, PIR, and other materials have different costs and performance characteristics.

2. Panel thickness

A 150 mm panel normally costs more than a 100 mm panel because it requires more insulation material.

3. Steel sheet thickness

A 0.6 mm steel sheet will normally cost more than a 0.4 mm sheet.

4. Surface material

PPGI, stainless steel, and aluminum have different material costs.

5. Panel quantity

Large projects may have different pricing from small orders.

6. Customized dimensions

Special sizes, colors, and structures may affect production costs.

7. Shipping

For international buyers, the final landed cost also depends on destination, container loading, freight, and local import charges.

Therefore, when comparing quotations from different cold room panel manufacturers, make sure you compare the same specifications rather than only comparing the price per square meter.


13. Can I buy cold room panels directly from a manufacturer in China?

Yes.

China is one of the major manufacturing bases for insulated sandwich panels and cold storage equipment.

Buying directly from a Chinese manufacturer can allow international buyers to customize:

Panel thickness/Panel dimensions/Surface materials/Colors/Joint systems/Packaging/Container loading/Project quantities

 

However, buyers should check more than the factory price.

Before placing an order, ask the manufacturer for:

Product specifications/Panel structure/Insulation density/Thermal conductivity/Steel sheet thickness/Surface coating/Fire-performance documentation

Production photos or videos/Previous export experience/Packing details/Delivery time/Warranty terms


14. What information should I provide when asking for a cold room panel quotation?

The more complete your project information is, the more accurate the quotation will be.

A good RFQ should include:

 

With this information, a manufacturer can normally provide a more accurate quotation and recommend suitable specifications.


15. What should I check before placing a cold room panel order?

Before paying a deposit, check the quotation carefully.

We recommend confirming these items:

Product Specification

Core material/Panel thickness/Insulation density/Thermal conductivity/Steel sheet thickness/Surface material/Color/Panel width/Panel length

 

Installation

Joint system/Cam-lock or other connection method/Sealing requirements/Accessories/Installation method

 

Commercial Terms

Price/MOQ/Production time/Packing/Shipping terms/Payment terms/Warranty/Spare parts or replacement policy

 

Project Requirements

Operating temperature/Room dimensions/Application/Local regulations/Fire-performance requirements

 

A clear specification sheet can prevent misunderstandings between the buyer and manufacturer.


How to Choose a Cold Room Panel Manufacturer in China

Price is important, but it should not be the only factor when selecting a supplier.

A reliable cold room panel manufacturer should be able to provide clear technical specifications, stable production quality, customization, export support, and professional communication.

For international buyers, it is also useful to check whether the manufacturer has experience with similar projects and can provide production photos, technical documents, packing information, and installation guidance.

At Element New Materials, we manufacture PU sandwich panels for cold storage applications and provide customized panel specifications for different temperature-controlled projects.

Our PU cold room panels are available with:

Sandwich Panel Type

Density kg/m³

Nominal Thermal Conductivity λ of Core Material [W/(m·K)]

Panel Thickness mm

Thermal Resistance R (m²·K/W)

Heat Transfer Coefficient U [W/(m²·K)]

Polyurethane Sandwich Panel

38-42K

0.024

50

2.23

0.45

75

3.28

0.31

100

4.32

0.23

150

6.40

0.16

200

8.48

0.12

250

11.02

0.09

 


Conclusion: Choose the Panel Based on the Project, Not Just the Price

Buying cold room panels is not simply a matter of choosing the cheapest price per square meter.

The right panel should match your temperature, insulation requirements, room dimensions, surface environment, fire requirements, installation method, and budget.

For most buyers, the first step is to determine the required operating temperature and room dimensions. The manufacturer can then recommend the appropriate insulation material and panel thickness.

If you are looking for PU cold room panels from a China manufacturer, send us your project temperature, room dimensions, panel quantity, and destination.

Element New Materials can provide customized cold room panel specifications and a quotation based on your project requirements.

Contact Element New Materials

Website: https://www.etpanel.com
Email: emily@etpanel.com
WhatsApp: +86 186 9732 0091

Request a Cold Room Panel Quote →