How to Choose Insulated Panels for Seafood Processing Facilities

Nov 22, 2026

Leave a message

 

1. Key Challenges of Seafood Processing Environments

Compared with general food processing facilities, seafood processing plants face three major environmental challenges.

 

Moisture and Frequent Washing

Washing raw materials, fish processing and equipment cleaning generate large amounts of moisture. Walls and ceilings may remain in high-humidity conditions for extended periods, with some areas exposed to direct water spray. If panel joints and edges are not properly sealed, moisture may penetrate these areas, increasing the risk of corrosion and damage to the insulation core.

 

Salt and Chloride Exposure

Seafood residues, saltwater processing and coastal salt spray can all increase chloride exposure. Chloride ions may cause pitting corrosion in metal materials. Therefore, panel configurations suitable for ordinary indoor environments may not provide sufficient protection in seafood processing facilities.

 

Cleaning Chemicals

Seafood processing facilities require regular cleaning and disinfection. Chlorine-based disinfectants and other cleaning chemicals may affect the performance of certain organic coatings. When selecting panels, their chemical resistance should be evaluated based on the actual cleaning products used, including their concentration and contact time.

 

2. How to Choose the Right Panel Facing Material?

Common facing materials for seafood processing facilities include pre-painted galvanized steel (PPGI), 304 stainless steel and 316 stainless steel.

 

Panel Facing Material Main Characteristics Typical Applications
PPGI Steel Cost-effective, with a wide range of colors and coating options General processing areas, packaging areas and some cold storage rooms
304 Stainless Steel Good corrosion resistance, with a smooth and easy-to-clean surface Humid areas and food processing environments with high hygiene requirements
316 Stainless Steel Better resistance to chloride-induced corrosion Areas with relatively high salt or chloride exposure

 

Not every area in a seafood processing facility needs to use stainless steel.

Washing and fish processing areas with high moisture levels generally require better surface protection. Packaging areas, equipment rooms and other general indoor spaces can use suitable pre-painted steel panels according to their operating conditions. Selecting materials according to different areas helps meet performance requirements while controlling project costs.

It is important to note that stainless steel is not completely corrosion-proof. Both 304 and 316 stainless steel require proper material selection and cleaning practices when exposed to high concentrations of salt or chlorine-based cleaning chemicals over extended periods.

 

Contact now

 

3. How to Select Metallic and Organic Coatings for Seafood Processing Facilities

For seafood processing facilities using PPGI insulated panels, corrosion protection depends on the combined performance of the metallic coating and organic coating. High humidity, saltwater splashes, chloride exposure and frequent cleaning all place additional demands on the coating system. Therefore, coating selection should be based on actual operating conditions rather than the coating name alone.

 

Metallic Coating Selection

For seafood processing projects, the key considerations include the level of salt exposure, cleaning frequency and the corrosion risks around panel edges and joints.

 

General Cold Storage and Packaging Areas: Where there is no direct saltwater contact or frequent washing, Z or AZ coatings with suitable coating weights can be considered according to project requirements.

Humid Environments with Moderate Corrosion Risk: AZ coatings offer a good combination of corrosion protection and can be considered for appropriately specified pre-painted steel panels.

Areas with Higher Corrosion Risks: AZM coatings may provide improved cut-edge protection in certain corrosive environments. However, the coating type alone cannot determine its suitability for long-term saltwater exposure. For areas in direct contact with saltwater or highly concentrated chlorides, alternative materials such as stainless steel should be evaluated.

 

Organic Coating Selection

 

For seafood processing facilities, the choice should take into account actual cleaning methods and chemical exposure.

General Indoor Cold Storage and Packaging Areas: PE coatings are an economical option for environments with limited salt exposure and relatively mild cleaning requirements.

Humid Areas Requiring Regular Cleaning: HDP and other high-durability coatings can be evaluated, but their resistance to the actual cleaning chemicals should be verified rather than assumed from the coating type alone.

Outdoor or Coastal Exposure: PVDF offers good weather resistance and color retention, making it suitable for exterior surfaces exposed to sunlight and changing weather conditions. However, its weather resistance does not necessarily mean equal resistance to chlorine-based disinfectants.

 

Important Factors for Coating Selection

When specifying pre-painted steel panels for seafood processing facilities, the following parameters should be evaluated together.

 

Evaluation Item Key Considerations
Metallic coating type Select Z, AZ or AZM according to humidity, salt exposure and corrosion risks.
Metallic coating weight Confirm the required coating weight based on the operating environment rather than considering the coating type alone.
Organic coating Consider indoor or outdoor exposure, cleaning frequency and chemical contact.
Paint film thickness Verify that the primer and topcoat thickness meet project requirements.
Adhesion and chemical resistance Check coating test data, particularly compatibility with chlorine-based cleaning chemicals.

 

It is important to understand that in seafood processing areas with prolonged direct exposure to saltwater, seafood residues or chlorine-based disinfectants, simply increasing the metallic coating weight or choosing a higher-grade topcoat cannot completely eliminate corrosion risks. For these high-exposure areas, the suitability of stainless steel facings should also be evaluated according to actual operating conditions.

 

4. What Other Parameters Should Be Considered Besides Coatings?

The panel facing provides external protection, while the insulation core and panel thickness directly affect temperature control and energy consumption in cold storage facilities.

 

PU Panels offer low thermal conductivity and good insulation performance, making them suitable for most seafood chill rooms and freezer rooms.

PIR Panels offer improved fire performance in certain formulations and can be considered for projects with higher fire-safety requirements. The applicable fire classification must be verified against product test results and local building and fire regulations.

Common panel thicknesses include:

Panel Thickness Typical Applications
75–100 mm General temperature-controlled processing areas and some chilled storage facilities
100–150 mm Chilled storage rooms and standard freezer rooms
150–200 mm Low-temperature freezer rooms and some blast-freezing facilities

 

These thicknesses are typical reference ranges, not fixed design standards. The final selection should be based on the required temperature, outdoor ambient conditions, room dimensions, incoming product temperature and refrigeration load.

 

Joint Sealing and Installation

In seafood processing environments, panel connections also require special attention. Even when the panel facing has good corrosion resistance, improperly treated joints, cut edges and corners can create areas where moisture accumulates and contamination may occur.

Cam-lock connections improve installation efficiency and provide tight mechanical connections between panels. However, the locking system alone does not replace proper sealing.

During installation, particular attention should be paid to:

Panel Joints: Ensure that panels are tightly connected to reduce moisture penetration through the joints.

Cut Edges: Provide suitable protection for site-cut sections and exposed metal edges.

Corners and Openings: Properly seal and finish wall corners, door openings and wall-to-floor junctions.

Sealing Materials: Select suitable sealants according to food processing requirements, operating temperatures and cleaning conditions.

For areas subject to frequent washing, the joint design should also minimize gaps and structures where water or contaminants can accumulate.

 

5. How to Determine the Right Panel Configuration?

The insulated panel configuration for a seafood processing facility should be determined by its actual corrosion exposure and temperature requirements, rather than using the same material throughout the entire project.

The following factors should be confirmed during the selection process:

Evaluation Factors Key Questions
Moisture exposure Are the panels exposed to persistent humidity or frequent high-pressure washing?
Salt exposure Is there contact with saltwater, seafood residues or coastal salt spray?
Cleaning chemicals Are chlorine-based disinfectants or other chemical cleaning agents used?
Panel facing Should PPGI, 304 or 316 stainless steel be selected?
Insulation requirements What are the required operating temperature and insulation thickness?
Installation details Are proper sealing solutions provided for joints, cut edges and corners?

For areas with relatively low corrosion risks, suitable pre-painted steel panels can be considered. For humid processing environments with frequent washing, 304 stainless steel may be a suitable option. In areas with greater saltwater or chloride exposure, the suitability of 316 stainless steel should be carefully evaluated.

 

The right insulated panel solution is not simply about choosing the most expensive material. It is about matching the level of surface protection, insulation performance and installation details to the actual operating conditions of the facility.